Repair Guide: 2003 Saab 9-3 Ignition Switch Replacement

The 2003 Saab 9-3 has been known to face issues with its ignition switch. Faults in this component can cause the vehicle to have difficulties starting or switching off. This step-by-step guide will help you replace this less common part in this unique car model.

Tools & Parts Required:

• T20 Torx driver
• Small flat blade screwdriver
• Ignition switch replacement for a 2003 Saab 9-3

Procedure:

• Step 1: Disconnect the battery. Before beginning work on any electrical system, it is crucial to disconnect the battery to avoid accidental shorts.
• Step 2: Remove the shroud around the shifter by gently prying it up.
• Step 3: Unscrew the shifter handle using the T20 Torx driver.
• Step 4: Underneath, locate the ignition switch. Unplug the three connectors attached to it.
• Step 5: On the opposite side of the connectors, locate the small hole. Insert the screwdriver into this hole and push to release the cylinder.
• Step 6: Replace with the new ignition switch. Make sure to align it properly for the connectors to fit.
• Step 7: Reassemble the shifter and reconnect the battery.

While this repair should solve most ignition switch related problems, If you still face difficulties, it's recommended to seek the help of a professional mechanic, as more serious underlying issues may exist.